Audio Technica VM530EN Dual Moving Magnet Phono Cartridge with Elliptical Stylus (Black/Orange)

From the manufacturer

Specifications

Type: VM
Frequency Response: 20 to 25,000Hz
Output Voltage: 4.5mV (1kHz, 5cm/sec.)
Channel Separation: 27dB (1kHz)
Output Balance: 1.5dB (1kHz)
Tracking Force: 1.8 to 2.2g (2.0g standard)
Coil Impedance: 2.7k ohms (1kHz)
DC Resistance: 800 ohms
Load Impedance: 47k ohms
Load Capacitance: 100 to 200pF
Coil Inductance: 460mH (1kHz)
Static Compliance: 35×10 -6 cm/dyne
Dynamic Compliance: 8×10 -6 cm/dyne (100Hz)
Stylus: Nude elliptical (0.3×0.7mil)
Cantilever: Aluminum pipe
Vertical Tracking Angle: 23°
Dimensions: H17.3×W17.0×D28.2mm
Weight: 6.4g
Replacement Stylus (Sold Separately): VMN30EN
Accessories Included: Four cartridge installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts, non-magnetic screwdriver, brush

Audio-Technica VM530EN

Elliptical Nude Stereo Turntable Cartridge

The VM530EN is a top-end elliptical stylus cartridge in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM530EN is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s lightweight 0.3 x 0.7 mil elliptical nude stylus reduces the execution mass of the vibration system, enabling fuller frequency reproduction and less tracking distortion than a bonded stylus. Includes mounting hardware.

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

VM dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus
Aluminum cantilever
Paratoroidal coils improve generating efficiency
Center shield plate between the left and right channels reduces crosstalk
Durable low-resonance polymer cartridge housing

A-T’s Dual Magnet Design Replicates the Structure of the Cutter Head

Instead of using a single, large magnet, the two magnets are arranged in the shape of a ‘V’. The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Elliptical Nude Stylus

Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

500 Series

Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

Replacement & Upgrade Styli

The cartridge becomes worn after an extended period of play, even the finest diamond stylus. Our VM cartridges can be used again for a long time only by replacing the stylus. Our renewed VM cartridges have 7 styli and 3 types of bodies. Not only it is not necessary to buy the cartridge itself, but also you experience the enjoyment of upgrade or various combination of VM cartridges.

Trusted by Professionals

Whether it’s on the boardroom table, the stage or in the studio, Audio-Technica products are trusted time and again by industry professionals looking for reliable, lovingly developed audio products for all budgets.

It’s Audio-Technica’s commitment to innovation, customer service and meticulous design that ensure professionals turn to us to provide solutions in conferencing, houses of worship, broadcasting, live sound, recording studios and beyond.

50 Years of Devotion to Music

For over 50 years Audio-Technica has worked alongside leading figures in sports and music broadcast to develop and hone a range of products that deliver on the highest level.

Audio-Technica have developed and delivered products to power the Grammys, World Cup, Super Bowl, Commonwealth Games as well as every Summer and Winter Games from Atlanta 1996 to Sochi 2014.

A Legacy in Innovation

Founded in 1962 by Hideo Matsushita, Audio-Technica positioned itself immediately as a leader in the manufacture and design of innovative audio products. It’s expertise in innovation quickly spread to various new fields and led to the development of tone arms, microphones and headphones. Audio-Technica soon became a benchmark in those fields. Making history.

A self-made man and audiophile, Hidéo Matsushita was the former Director of the Tokyo Museum of Modern Art. It all started in his workshop, with the hand crafting of stereo cartridges. 50 years later, Audio-Technica has become a global leader in audio innovation.

A Passion for Listening

Humility, passion, creativity and expertise in sound are the core values behind Audio-Technica’s legacy, greatly inspired by its founder – whose imprint on the company’s philosophy is still felt today. Audio-Technica’s passion for listening evolved in the 70’s, when it started designing headphones, building upon a legacy in innovation, meticulous engineering and artistic design.

Today, Audio-Technica’s audio products have become globally synonymous with consistently high sonic performance paired with impeccable build construction and artistic design.

Original Release Date ‏ : ‎ 2017
Is discontinued by manufacturer ‏ : ‎ No
Product dimensions ‏ : ‎ 10.16 x 5.08 x 7.62 cm; 453.59 Grams
Date First Available ‏ : ‎ 1 January 2024
Manufacturer ‏ : ‎ Audio-Technica
ASIN ‏ : ‎ B01M5EE3S3
Item Model Number ‏ : ‎ VM530EN

Elliptical Nude profile diamond stylus
Para-toroidal coils improve generating efficiency
VM type dual magnet system
Aluminium cantilever
Centre shield plate between stereo channels