Yanase A#60 SZA04 Corner Cutting for Woodworking

You can also use both sides and sides to grind corners. [Features] For removing logs and smoothing surfaces. You can also use both sides and sides to grind corners. The base is small with the polishing cloth suppressed, so it can be used until the end near the lock nut of the disc grinder. Small base for cutting 1.3 times (compared to our company) Hole diameter 0.6 inch (15 mm) and 3.9 inch (100 mm) for sisk grinders.
For removing logs and smoothing surfaces
Fully usable disc that can be sharpened both sides and sides. This product is designed for ease of use
You can also use it on the surface, side, and back, so you can polish corners and narrow corners, corners and grooves in addition to normal flat surfaces
The base is small that the polishing cloth is suppressed, so it can be used until the end near the lock nut of the disc grinder. Very economical. A small foundation that can be cut approximately 1.3 times. Compare to our company:
Abrasive material: A (random), Grit size: #60
Size: outer diameter 3.9 inches (100 mm) x hole diameter 0.6 inches (15 mm), for 3.9 inches (100 mm) sis
Maximum Rotational Speed: 13,000 per minute